Transdec: A Program to Calculate the Extra Decay Energy Generated in a Power Transient
C.R. Calabrese, C.R. Boss, B. Rouben (AECL)
A Universal Driver for Collision Probability and Response Matrix Transport Codes
G. Marleau, A. Hebert (EPM)
From Platinum to Mercury: The Alchemist's Nightmare
K.J. Serdula, G. Parent (Serdula Systems)
Calculating Three-Dimensional Neutronic Transients on Microcomputers
B. Rouben, C.R. Calabrese (AECL)
A Method for Simulating Grey Slabs in CANDU Reactors
A.R. Dastur, D.B. Buss (AECL)
DERREP; A Computer Code for the Calculation of Decay Heat in CANDU Reactor Nuclear Fuel
R.P. Steadman, J.V. Marczak, M.K. O'Neill (OH)
2: Thermalhydraulics I
Simple Functions for the Fast Approximation of Light Water Thermodynamic Properties
W.J. Garland, B.J. Hand (MacU)
Piecewise Polynomial Approximation of Thermodynamic Properties of Heavy Water
Y. Liner, B.N. Hanna, D.J. Richards (AECL)
Modelling of Nonhomogeneous Nonequilibrium Critical Two-Phase Flow
S.M. Sami (U of Sherbrooke)
Numerical Predictions of Two-Phase Flow Parameters in Inverted U-tubes under Reflux Condensation
R. Girard, J.S. Chang (MacU)
Investigation of CCFL in Pipe Elbows
L. Thomson, M. Kawaji, V.S. Krishnan (UT)
3: Thermalhydraulics II
Prediction of Pressurizer Transient by the IDRIFF Two-phase Simulation Code
R. Sollychin, J.S. Chang, W.J. Garland (MacU)
The Dynamic Simulation of a Two-Node Non-Equilibrium 600MW CANDU Pressurizer System
H.O. Tezel, D.A. Meneley (UNB)
MISSFINCH: Models for Steady Stratified Flow in CANDU Headers
P. Gulshani (AECL)
Steady-State Two-Phase Header Flow Model
H.G.O. De Man, Y. Feyginberg, W.I. Midvidy (OH)
GENHTP - A New Heat Transfer Package for CATHENA
J.P. Mallory, P. Yuen, C.B. So (AECL)
4: Thermalhydraulics III
Reactor Operator Companion for CANDU Heat Transport Systems
W.J. Garland, J.W.D. Anderson, J.D. Hoskins (MacU)
CATHENA Study of Large LOCA Channel Behaviour
S.D. Grant, R.L. Dasilva (AECL)
The Effect of Fuel Heat Transfer on Early Void Production Following a Large Pipe Break in CANDU Reactors
S.D. Grant, J.M. Hopwood (AECL)
Large Outlet Header Break Experiments in a CANDU-Type Heat Transport Loop
P.J. Ingham (AECL)
Implementation of a Post-Dryout Model in the ASSERT Subchannel Code
A. Tahir, S. Robinovitch, P.R. Thibeault (AECL)
Thermalhydraulic Plant Modelling of a CANDU Reactor Including Plant Control Systems using CATHENA
F.W. Barclay, D.J. Richards (AECL)
5: Small Reactor Physics
Safety Aspects of Nuclear Battery Reactor Design
J.V. Donnelly (AECL)
Some Aspects of MAPLE-10 Fuel Performance During Normal Operation
S. Girgis, I.E. Oldaker, G.E. Gillespie (AECL)
Recent Developments in Static Reactor Physics Modeling Techniques used for the Maple Research Reactor Program
P.A. Carlson, H.J. Smith, R.J. Ellis, A.G. Lee (AECL)
Comparisons of the Steady-State and Transient Thermal Behaviours of UO2, U-A1 and U3Si-A1 MAPLE Research Reactor Fuels
R.J. Ellis, P.A. Carlson, H.J. Smith (AECL)
The Sensitivity of MAPLE-X10 Core Reactivity to Variations in the Three-Dimensional Coolant Void Distribution
H.J. Smith (AECL)
6: Aerosol Transport and Containment Behaviour
Upper Bound Calculations of Aerosol Vapour Mass Concentrations in a CANDU Fuel Channel during Severe Fuel Damage Accidents
S.R. Mulpuru (AECL)
Pressure Challenges to CANDU Containment due to Hydrogen Combustion during Accidents
P. Klazek (OH)
A Solution Scheme for Aerosol Transport Models
S.R. Vatsya, M. Razzaghi (AECL)
Integrated Aerosol and Thermalhydraulic Modelling
B.H. McDonald (AECL)
7: Thermalhydraulics IV
Effects of Antivibration Bars on the U-Bend Flow Distribution in Recirculating Steam Generators
L.N. Carlucci, J.M. Pietralik (AECL)
Techniques for the Estimation of Pressure Loss Coefficients of Bundle Junctions, Grid Spacers and Bearing Pads
S.C. Sutradhar, A. Tahir (AECL)
Simulation of the SPEL Small Scale Moderator Experiments Using the General Purpose Fluid-Flow Heat Transfer Code Phoenics
W.M. Collins (AECL)
Thermalhydraulic Simulations for Plate-Type Nuclear Fuel Elements
H.E.C. Rummens, J.S. Chang, P. Ernst (MacU)
